Epson ActionNote 880C User Manual - Fax/Data Modem - Page 17
Determines whether the modem sends the result codes to the DTE.
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
On Return to the On-line State Applies to asynchronous operation only. If the user enters the command mode from the data mode by issuing the escape sequence, or as a result of ON-to-OFF transition of DTR with the AT&D1 option in effect, the user may return to the data mode without terminating a call by issuing the ATO command. O0 Causes the modem to return to the data mode. (default) O1 Enters on-line data mode with a retrain before returning to on-line data mode. P Set Pulse Dial as Default Causes the modem to assume that all subsequent dial commands are pulse dialed. You may omit the "P' from the dial strings. Q Result Code Display Determines whether the modem sends the result codes to the DTE. Q0 Allows the modem to send result codes to the DTE. (default) Q1 Prohibits the modem from sending result codes to the DTE. 2 - COMMAND REFERENCE 9