Epson ActionNote 880C User Manual - Fax/Data Modem - Page 55
Detect DTR Change, RTS to CTS Delay Interval, Bit Mapped Options, Range: 0-255 1/100 of a second
![]() |
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
S25 Detect DTR Change S25 defines the minimum amount of time that DTR has to remain off (i.e., on-to-off-to-on transitions) before the modem will perform the function specified by '& Dn'command. A change in DTR that persists for a shorter time than the valued specified in S25 is ignored by the modem (see '&Dn' command). Range: 0-255 (1/100 of a second) Default: 5 S26 RTS to CTS Delay Interval S26 is only used for synchronous operation. This register, when the modem is configured for &R0, specifies the time delay between an off-to-on transition on RTS and turning CTS on. Range: 0-255 (1/100 of a second) Default: 1 (is equal to second) S27 Bit Mapped Options Bit Value Description Bit 3,1,0 000 &Q0 is selected. (default) 001 &Q1 is selected. 010 &Q2 is selected, 011 &Q3 is selected. 48 S REGISTER REFERENCE - 3
![](/manual_guide/products/epson-actionnote-866c-user-manual-faxdata-modem-8a7252d/55.png)