Epson ActionNote 880C User Manual - Fax/Data Modem - Page 30
received from remote modem are sent to the DTE. In both cases, flow control, normal mode
![]() |
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
\V1 Enables modified MN P codes. \V2 Enables extended V.42 codes. \Xn Set XON/XOFF Passthrough If software flow control is enabled (\Ql), this command defines whether the XON (11 hex) and XOFF (13 hex) characters received from the DTE are sent to the remote modem. In addition, if the modem port flow control is enabled (\G1) in normal mode, the command specifies whether the XON and XOFF characters received from remote modem are sent to the DTE. In both cases, flow control operation is not affected. \X0 Processes flow control characters. (default) \X1 Processes flow control characters and passes them through to the local or remote so they can process the characters. \Y Switch to Reliable Mode in normal mode (\N0), the modem attempts to originate or answer an MNP link request, depending on whether the modem originated or answered the physical connection, respectively. The remote modem must attempt to answer/originate the MNP link for the link to be established. 22 COMMAND REFERENCE - 2
![](/manual_guide/products/epson-actionnote-866c-user-manual-faxdata-modem-8a7252d/30.png)