Epson ActionNote 880C User Manual - Fax/Data Modem - Page 19

Commands Preceded by &, The partial connect message reports CONNECT, the full message reports CON

Get Epson ActionNote 880C PDF manuals and user guides View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

The partial connect message reports CONNECT, the full message reports CONNECT XXXX, where XXXX is the data rate. Yn Enables or Disables Long Space Disconnect Y0 Disables Long Space Disconnect. (default) Y1 Enables Long Space Disconnect. Zn Reset Zn, which must be placed at the end of the command line, resets the active configuration of the modem to the stored configuration saved in nonvolatile RAM, hanngs up the modem. and clears the command buffer. Z0 Resets the modem and loads stored configuration 0. (default) Z1 Resets the modem and loads stored configuration 1. 2.2.a Commands Preceded by & &Cn Select DCD Options &C0 Maintains an ON status for the Data Carrier Detect. (DCD) &C1 Uses the actual state of the carrier from the remote modem for DCD. (default) 2 - COMMAND REFERENCE 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
The partial connect message reports CONNECT, the full message reports CON-
NECT XXXX, where XXXX is the data rate.
Yn
Enables or Disables Long Space Disconnect
Y0
Disables Long Space Disconnect.
Y1
Enables Long Space Disconnect.
(default)
Zn
Reset
Zn,
which
must be placed at the end of the command line, resets the active configu-
ration of the modem to the stored configuration saved in nonvolatile RAM, hanngs
up the modem. and clears the command buffer.
Z0
Resets the modem and loads stored
configuration 0. (default)
Z1
Resets the modem and loads stored
configuration 1.
2.2.a Commands Preceded by &
&Cn
Select DCD Options
&C0
Maintains an ON status for the Data Carrier
Detect. (DCD)
&C1
Uses the actual state of the carrier from the
remote modem for DCD. (default)
2 - COMMAND REFERENCE
11