Epson ActionNote 880C User Manual - Fax/Data Modem - Page 9
INTRODUCTION, CCIIT V.27ter and V.29, V 17, T.4 and T, 30. Switching between DATA mode op
![]() |
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1- INTRODUCTION Congratulations on your purchase of this outstanding Fax/Data Modem. This manual describes how to operate your new Fax/Data Modem. Instructions for installing your Fax/Data Modem will be found in the Installation Manual, while the information in this manual, deals exclusively with the operation of the modem after it is installed, such as the command set, the internal configuration registers, troubleshooting and testing. Features : These Fax/Data Modems combine the features of a 14400 bps data modem and a 14400 bps FAX modem. Your new Fax/Data Modem gives your personal computer the ability to send and receive FAX messages over the telephone line like a standard FAX machine. Your Fax/Data Modem also allows your PC to communicate with other personal computers, terminals or BBS's (Bulletin Board Systems) through the data modem functions, When used as a data modem your Fax/Data Modem uses the standard AT command set and is fully compatible with CCITT V.42, V.42bis, V.32bis, V.32, V.22bis, V.22, V.21, MNP 2-5, Bell 103 and 212A. When used as a Fax/Data Modem it communicates with all CCITT Group 3 FAX machines and is compatible with CCIIT V.27ter and V.29, V 17, T.4 and T,30. Switching between DATA mode operation and FAX mode operation of your Fax/Data Modem is done through its firmware, no hardware settings are required. 1- INTRODUCTION 1
![](/manual_guide/products/epson-actionnote-866c-user-manual-faxdata-modem-8a7252d/9.png)