Epson ActionNote 880C User Manual - Fax/Data Modem - Page 39
Result Codes, Basic Response Codes \V0
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
provided below. Format: char1=char2=char3=escape character (S2) e.g., DTE: +++AT DCE: OK NOTE: TIES requires that the three-character escape sequence be contiguous and not repeated. The character immediately preceding the first character of the three-character sequence cannot be the same as the escape character. Therefore, '+++AT' is valid, but '++++ AT' is not. 2.5 Result Codes Basic Response Codes (\V0) Numeric Code Verbose Code 0 OK 1 CONNECT 2 RING 3 NO CARRIER 4 ERROR 5 CONNECT 1200 6 NO DIAL TONE 7 BUSY 2 - COMMAND REFERENCE 31
provided below.
Format:
<char1> <char2> <char3> <AT command> <contents of S3>
char1=char2=char3=escape character (S2)
e.g.,
DTE: +++AT<CR>
DCE: OK
NOTE:
TIES requires that the three-character escape sequence be
contiguous and not repeated. The character immediately pre-
ceding the first character of the three-character sequence cannot
be the same as the escape character. Therefore, ‘+++AT<CR>’
is valid, but ‘++++ AT<CR>’ is not.
2.5 Result Codes
Basic Response Codes (\V0)
Numeric Code
Verbose Code
0
1
2
3
4
5
6
7
OK
CONNECT
RING
NO CARRIER
ERROR
CONNECT
1200
NO DIAL TONE
BUSY
2 -
COMMAND REFERENCE
31