Epson ActionNote 880C User Manual - Fax/Data Modem - Page 48

Range, 255 seconds, Default: 60 seconds, Pause Time for Dial Modifier, Carrier Detect Response Time

Get Epson ActionNote 880C PDF manuals and user guides View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

remote modem carrier after dialing the telephone number. If the remote modem carrier is not detected within the S7 time limit, the modem will hang-up and send a NO CARRIER response code to the DTE. If the remote modem carrier is detected, the modem goes into on-line data mode and sends a CONNECT message to the DTE. S7 also specifies the time duration for the 'W' (wait for dial tone) dial modifier. Range: 1-255 seconds Default: 60 seconds S8 Pause Time for Dial Modifier S8 specifies the amount of time that the modem will pause during the dialing process each time the ',' dial modifier is detected in the dialing string, Range: 0-255 seconds Default: 2 seconds S9 Carrier Detect Response Time S9 specifies how long the remote modem carrier must be present on the telephone line before the modem will detect it and turns on DCD, The greater the time duration, the less likely that a false 3-S REGISTER REFERENCE 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
remote modem carrier after dialing the telephone number. If the
remote modem carrier is not detected within the S7 time limit,
the modem will hang-up and send a NO CARRIER response code
to the DTE. If the remote modem carrier is detected, the modem
goes into on-line data mode and sends a CONNECT message to
the DTE.
S7 also specifies the time duration for the ‘W' (wait for dial tone)
dial modifier.
Range:
1-255 seconds
Default: 60 seconds
S8
Pause Time for Dial Modifier
S8 specifies the amount of time that the modem will pause during
the dialing process each time the ‘,’ dial modifier is detected in
the dialing string,
Range: 0-255 seconds
Default: 2 seconds
S9
Carrier Detect Response Time
S9 specifies how long the remote modem carrier must be present
on the telephone line before the modem will detect it and turns on
DCD, The greater the time duration, the less likely that a false
3-S REGISTER REFERENCE
41