Epson ActionNote 880C User Manual - Fax/Data Modem - Page 33

Commands Preceded by - and “

Get Epson ActionNote 880C PDF manuals and user guides View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

8-255 Modem performs a Retrain. (i.e., if configured for %E1) 2.2.d Commands Preceded by - and " -Cn Generate Data Modem Calling Tone This command allows the DTE to select whether the modem will send 1300 Hz calling tone when originating a Data Modem connection. -C0 Calling tone disabled. (default) -C1 Calling tone enabled. -Jn Set V.42 Detect Phase In V.42 modes (\N3, \N4), this command specifies whether the modem will detect V.42, MNP, or no error-correcting protocols from the remote modem and change to the appropriate mode. Otherwise, only LAPM will be attempted. -J0 Disables the V.42 detect phase. -J1 Enables the V.42 detect phase. (default) "Hn V.42 bis Compression Control This command specifies whether the data in the LAPM frames are compressed using the V.42 bis data compression, which can improve throughput by as much as 400%. Compression can be negotiated to operate in only one direction, or in both directions. 2 - COMMAND REFERENCE 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
8-255
Modem performs a Retrain. (i.e., if configured for %E1)
2.2.d Commands Preceded by - and “
-Cn
Generate Data Modem Calling Tone
This command allows the DTE to select whether the modem will send 1300 Hz
calling tone when originating a Data Modem connection.
-C0
Calling tone disabled. (default)
-C1
Calling tone enabled.
-Jn
Set V.42 Detect Phase
In V.42 modes (\N3, \N4), this command specifies whether the modem will detect
V.42, MNP, or no error-correcting protocols from the remote modem and change
to the appropriate mode. Otherwise, only LAPM will be attempted.
-J0
Disables the V.42 detect phase.
-J1
Enables the V.42 detect phase. (default)
“Hn
V.42 bis Compression Control
This command specifies whether the data in the LAPM frames are compressed
using the V.42 bis data compression, which can improve throughput by as much as
400%.
Compression can be negotiated to operate in only one direction, or in both
directions.
2 - COMMAND REFERENCE
25