Epson ActionNote 880C User Manual - Fax/Data Modem - Page 21
&Gn, Set Guard Tone, Auxiliary Relay Control, &Pn Select Pulse Dialing Make/Break Ratio
![]() |
View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
&Gn Set Guard Tone &G0 &G1 &G2 Guard tone disabled. (default) 550 Hz guard tone enabled. 1800 Hz guard tone enabled. &Jn Auxiliary Relay Control This command is only included for compatibility and performs no function except to load the S-register. &J0 &J0 command. (default) &J1 &J1 command. &Pn Select Pulse Dialing Make/Break Ratio &P0 Sets a 39/61 make/break ratio at 10 pps. (default) &P1 Sets a 33/67 make/break ratio at 10 pps. &Sn DSR Option This command controls how the modem treats the DSR signal. &S0 DSR circuit always on. (default) &S1 DSR circuit is on during handshaking, off in test or idle modes. DSR is on when carrier is lost. 2 - COMMAND REFERENCE 13
![](/manual_guide/products/epson-actionnote-866c-user-manual-faxdata-modem-8a7252d/21.png)
&Gn
Set Guard Tone
&G0
Guard tone disabled. (default)
&G1
550 Hz guard tone enabled.
&G2
1800 Hz guard tone enabled.
&Jn
Auxiliary Relay Control
This command is only included for compatibility and performs no function except
to load the S-register.
&J0
&J0
command. (default)
&J1
&J1 command.
&Pn Select Pulse Dialing Make/Break Ratio
&P0
Sets a 39/61 make/break ratio at 10 pps. (default)
&P1
Sets a 33/67 make/break ratio at 10 pps.
&Sn DSR Option
This command controls how the modem treats the DSR signal.
&S0
DSR circuit always on. (default)
&S1
DSR circuit is on during handshaking, off
in test or idle modes. DSR is on when carrier
is lost.
2 - COMMAND REFERENCE
13