Epson ActionNote 880C User Manual - Fax/Data Modem - Page 74

APPLICATION EXAMPLES, Command line: AT&Z2=T03, 709394<CR&gt

Get Epson ActionNote 880C PDF manuals and user guides View all Epson ActionNote 880C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

6- APPLICATION EXAMPLES 6.1 Dialing a Remote Modem Command line: ATDP9WT002, (886)-7128423 This command line instruct the modem to dial a remote modem through a PBX. The modem first use pulse dialing to dial 9 (the access mde of the PBX), wait for outside dial tone, and then use touch tone dialing to dial 002 once a one-second continuous dial tone is detected within 30 seconds, pause for 2 seconds (if S8=2) and then dial 8867128423. 6.2 Dial a Stored Number Command line: AT&Z2=T03,709394 Command line: ATDS=2 The first command line store the dial string T03, 709394 to the 3rd location in NVRAM. Afterwards you can use the second command line to dial this stored number. The dial string T03, 709394 will appear on the screen to indicate the number being dialed. 6 - APPLICATION EXAMPLES 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
6- APPLICATION EXAMPLES
6.1 Dialing a Remote Modem
Command line: ATDP9WT002, (886)-7128423<CR>
This command line instruct the modem to dial a remote modem through a PBX.
The modem first use pulse dialing to dial 9 (the access mde of the PBX), wait for
outside dial tone, and then use touch tone dialing to dial 002 once a one-second
continuous dial tone is detected within 30 seconds, pause for 2 seconds (if S8=2)
and then dial 8867128423.
6.2 Dial a Stored Number
Command line: AT&Z2=T03,709394<CR>
Command line: ATDS=2<CR>
The first command line store the dial string T03, 709394 to the 3rd location in
NVRAM. Afterwards you can use the second command line to dial this stored
number. The dial string T03, 709394 will appear on the screen to indicate the num-
ber being dialed.
6 - APPLICATION EXAMPLES
67