Epson BrightLink 480i User Manual - Page 111
Calibrating Automatically, Using the Interactive Pens, For best performance
View all Epson BrightLink 480i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
1 Pen tip 2 Attachment for optional strap or cord 3 Battery light 4 Power switch 5 Battery cover 1. To turn on the pen, slide the power switch. The green light comes on briefly. If the battery is low, the light flashes. Note: For best performance, hold the pen perpendicular to the board, as shown below. Do not cover the black section near the tip of the pen. 2. Do the following to use the pen as a mouse: • To left-click, tap the board. • To double-click, tap twice. • To right-click, press the board with the pen for about 3 seconds. • To click and drag, tap and drag with the pen. • To move the cursor, hover over the board without touching it. 3. When you are finished using the pen, slide the power switch to turn it off. Calibrating Automatically Calibrating Manually Parent topic: Using the Interactive Pens 111