Epson BrightLink 480i User Manual - Page 198
Solutions When \, Solutions When the Interactive Pens Do Not Work
View all Epson BrightLink 480i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Solutions When the Built-In Toolbar Does Not Work Solutions When the Interactive Pen Position Is Not Accurate Solutions When the Interactive Pens Are Slow or Difficult to Use Solutions When the Interactive Pens Cause Interference or Unwanted Effects Parent topic: Solving Problems Solutions When "Hardware Device Not Found" Message Appears If the "Hardware device not found" message appears, try the following solutions: • Check the USB cable connection from the projector to your computer. Try disconnecting and then reconnecting the cable. • If you are projecting from a laptop computer, make sure the battery has enough power, or connect the laptop to a power outlet. • If your USB cable is installed in the wall, try connecting a different USB cable to the projector and your computer. Parent topic: Solving Interactive Pen Problems Solutions When "Error Occurred in the Easy Interactive Function" Message Appears If the "Error occurred in the Easy Interactive Function" message appears, contact Epson for help. Parent topic: Solving Interactive Pen Problems Related references Where to Get Help Solutions When the Interactive Pens Do Not Work If the pens do not work, try the following solutions: • The pens go into standby mode if you forget to turn them off. Touch the tip of the pen to activate it. • Make sure you are not covering the black section near the tip of the pen. • Make sure nothing is blocking the signal between the pen and the interactive pen receiver on the projector. • Try holding the pen at a different angle so that your hand is not blocking the signal. • Make sure the cable cover is in place to keep cables from blocking the signal. • Make sure the pen battery has enough power. Try replacing the battery. 198