Epson C823622A Administrator's Manual - Page 102

Entity Type: If you are using a Level 1 printer, set the Entity type to match the driver for the printer with the interface card. The default is "epson". Click the Entity configuration button to enter the entity type (up to 32 characters). If you are using a Level 2 or 3 printer, you do not have to set this option. The list view displays the printer's Entity type on an AppleTalk network. Zone Name: Select the network zone in which you want the printer to appear. Network Number Set: Select either Auto or Manual. Auto is usually the preferred setting. Network Number for Manual Mode: Type a value between 0 and 65534 when Network Number Set is Manual. 6. After making settings, click Send. The Password dialog box appears. 7. Enter your password (up to 20 characters) and click OK to save settings. If you are entering a password for the first time, click Change and set the password. For more information about passwords, see "About passwords" on page 9-16. After updating is complete, refresh the configuration. To do this, quit EpsonNet MacAssist, and open it again. c Caution: Since it takes 2 or 3 minutes to send new settings to the Internal Print Server, you must wait to turn off your printer until after the on-screen message appears. 4-4 Using the Interface Card with Macintosh