Epson C823622A Administrator's Manual - Page 105
Entity type, Network number set, Network number for manual mode
![]() |
UPC - 010343832404
View all Epson C823622A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Entity type: If you are using a Level 1 printer, set the Entity type to match the driver for the printer with the interface card. The default is "epson". Click the Entity configuration button to enter the entity type (up to 32 characters). If you are using a Level 2 or 3 printer, you do not have to set this option. The list view displays the printer's Entity type on an AppleTalk network. Network number set: Select either Auto or Manual. Auto is usually preferred. 4 Network number for manual mode: Type a value between 0 and 65534 when Manual is selected for the Network number setting. 5. After making the settings, click OK. The Password dialog box appears. 6. Enter your password (up to 20 characters) and click OK to save settings. If you are entering a password for the first time, click Change and set the password. For more information about passwords, see "About passwords" on page 9-7. Follow the on-screen instructions. After updating is complete, refresh the configuration by selecting Refresh from the View menu. c Caution: Since it takes 2 or 3 minutes to send new settings to the interface card, you must wait until the on-screen message appears before turning off your printer. Using the Interface Card with Macintosh 4-7
![](/manual_guide/products/epson-c823622a-administrators-manual-53386bc/105.png)