Epson C823622A Administrator's Manual - Page 257
Unable to make settings using EpsonNet WebAssist.
![]() |
UPC - 010343832404
View all Epson C823622A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Unable to make settings using EpsonNet WebAssist. Cause You haven't set the IP address for the interface card. What to do Set the IP address for the interface card using EpsonNet WinAssist, MacAssist, or the ping command, as described in Chapter 2. You can check the IP address on a status sheet. 14 Unable to set the IP address using the arp/ping commands. Cause What to do The network cable may be Connect the network cable. Also, check disconnected. the network environment. The address of the router is set as the default gateway. Set the IP address of your computer for the default gateway temporarily. After setting the IP address, return the IP address to the original value. PING is not on. Check the Set by PING check box in the TCP/IP menu of EpsonNet WinAssist. Select ON for Set by PING in the TCP/ IP screen of EpsonNet WebAssist. Troubleshooting 14-3
![](/manual_guide/products/epson-c823622a-administrators-manual-53386bc/257.png)