Epson C823622A Administrator's Manual - Page 154
Setting up for HP- UX 9.05 or later, Terminate the printer service.
UPC - 010343832404
View all Epson C823622A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Setting up for HP-UX 9.05 or later In the following steps, substitute the name that your printer with the interface card will be known by for HOSTNAME, and the name by which you want your printer to be known for Rprinter. 1. Add the IP address and host name to the /etc/hosts file. For example: 22.33.44.55 HOSTNAME 2. Terminate the printer service. For example: lpshut 3. Create a printer. For example: lpadmin -pRPrinter -v/dev/null -mrmodel -ormHOSTNAME -orpaux 4. Restart the print service. For example: lpshed 5. Enable the printer for use. For example: accept Rprinter enable Rprinter Use the lp command to print. For example: lp -DRPrinter Print-File-Name 8-6 Using the Interface Card with UNIX
8-6
Using the Interface Card with UNIX
Setting up for HP-UX 9.05 or later
In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1.
Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Terminate the printer service.
For example:
lpshut
3.
Create a printer.
For example:
lpadmin -pRPrinter -v/dev/null -mrmodel
-ormHOSTNAME -orpaux
4.
Restart the print service.
For example:
lpshed
5.
Enable the printer for use.
For example:
accept Rprinter
enable Rprinter
Use the lp command to print.
For example:
lp -DRPrinter Print-File-Name