Epson C823622A Administrator's Manual - Page 78
Configuring the interface card using EpsonNet WinAssist, Run EpsonNet WinAssist from the Start menu.
![]() |
UPC - 010343832404
View all Epson C823622A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Configuring the interface card using EpsonNet WinAssist Configure the interface card using EpsonNet WinAssist. 1. Turn on the printer with the interface card installed. 2. From any NetWare client, log in to the target NetWare server with supervisor privileges or ADMIN. 3. Load the print server from the file server's system console which the print queue volume is set. >LOAD PSERVER PCONSOLE or >LOAD PSERVER print server name you set using NWADMIN 4. Run EpsonNet WinAssist from the Start menu. 5. Click IPX. Select the printer you want to configure from the list, then click Configuration. Note: ❏ If you have connected more than one printer with the same type of interface card to the network, you can distinguish between the cards by the MAC address on the status sheet or the sticker on the interface card. ❏ If the IP address is set to the default IP address, the printer model may not appear. 3-28 Using the Interface Card with NetWare
![](/manual_guide/products/epson-c823622a-administrators-manual-53386bc/78.png)