Epson C823622A Administrator's Manual - Page 85

❏ For Remote (rpinter on IPX) connection Print a status sheet of the interface card and configure the corresponding items. Port Type: Select LPT1. SAP Name: Enter the Primary Print Server Name. Printer Number: Enter the Printer Port Number. Network: Enter the Network Address. Node: Enter the MAC Address. Interrupt: Select None. 3 ❏ For Remote (LPR on IP) connection IP Address: Enter the IP address of the interface card. You can confirm the IP address on a status sheet. ❏ For Forward jobs to Queue connection Queue Name: Enter the queue name that the interface card uses in the legacy queue-based print services (either in Print Server mode or Remote Printer mode). Queue User Name: Type a user name who has rights for the above queue. Password: Enter the password that the Queue User uses to login to the server. 6. Select None for the Printer Driver. 7. Confirm the Printer Agent that you have just created. In NetWare Administrator, double-click the NDPS Manager object and click the Printer Agent List button. Check that the status of the Printer Agent you have just created is "Idle". Note: If you have selected Remote (rprinter on IPX), configure the interface card using EpsonNet WinAssist, as described in the next section, and then print a status sheet. Go to the next section if you select Remote (rpinter on IPX). Go to "Setting the printer on client workstation" on page 3-40 if you select Remote (LPR on IP) or Forward jobs to Queue. Using the Interface Card with NetWare 3-35