Epson C823622A Administrator's Manual - Page 181

TCP/IP, AppleTalk, Select Auto or Manual. It should usually

Page 181 highlights

❏ TCP/IP Items Get IP Address Set by PING IP Address Subnet Mask Default Gateway SUBMIT button ❏ AppleTalk Items AppleTalk Printer Name Entity Type Zone Name Network Number Set Network Number for Manual Mode SUBMIT button Explanations Select the method of acquiring the IP address; Manual, RARP, BOOTP, or DHCP. Select ON when setting the IP address using ping command. Enter the IP address for the interface card if set to Manual. Set the subnet mask. Set the gateway address if needed. Update the changes. Explanations Enable or Disable AppleTalk. Enter the name of the printer attached to the interface card (up to 32 characters). Displays the Entity type of the printer attached to the interface card. If you are using a Level 1 printer, enter the entity type. Enter the AppleTalk zone. Select Auto or Manual. It should usually 9 be set to Auto. Enter the network number when you select Manual for Network Number Set. Update the changes. The EpsonNet Configuration Utility 9-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279

9
The EpsonNet Configuration Utility
9-23
TCP/IP
AppleTalk
Items
Explanations
Get IP Address
Select the method of acquiring the IP
address; Manual, RARP, BOOTP, or DHCP.
Set by PING
Select ON when setting the IP address
using ping command.
IP Address
Enter the IP address for the interface card
if set to Manual.
Subnet Mask
Set the subnet mask.
Default Gateway
Set the gateway address if needed.
SUBMIT button
Update the changes.
Items
Explanations
AppleTalk
Enable or Disable AppleTalk.
Printer Name
Enter the name of the printer attached
to the interface card (up to 32
characters).
Entity Type
Displays the Entity type of the printer
attached to the interface card. If you are
using a Level 1 printer, enter the entity
type.
Zone Name
Enter the AppleTalk zone.
Network Number Set
Select Auto or Manual. It should usually
be set to Auto.
Network Number for
Manual Mode
Enter the network number when you
select Manual for Network Number Set.
SUBMIT button
Update the changes.