Epson C823622A Administrator's Manual - Page 189
Setting Up Your Printer, Adding a printer located in the same segment
![]() |
UPC - 010343832404
View all Epson C823622A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Setting Up Your Printer When setting up a printer to print with LPR, you can add both a printer located in the same segment and one located beyond a router. Note: ❏ Be sure that the computer is connected on the network and TCP/IP is correctly set. ❏ A valid IP address other than default value "192.168.192.168" for the interface card must be set; otherwise the printer does not appear under the Epson_lpr group icon. See Chapter 2 to set the IP address for the interface card. ❏ The EPSON Status Monitor 2 shipped with the interface card models C82362✽/C82363✽/C82364✽ with software version 1.x and EPL-N2700/N4000 printers enables EPSON TCP/IP printers. EPSON TCP/IP printers can coexist with lpr printers added by EpsonNet Direct Print. ❏ The functions such as pause printing, cancel printing, and purge print job are not available when you double-click the printer icon in the Printers folder. Adding a printer located in the same segment 1. Windows 98/95/NT 4.0: Double-click the Network Neighborhood icon. Windows 2000: Double-click the My Network Places icon. Double-click the Entire Network icon , click entire contents, and then double-click the EpsonPeripheralNetwork icon. 10 2. Right-click the Epson_lpr icon and select Properties. The Epson_lpr Properties dialog box appears. EpsonNet Direct Print Utility 10-3
![](/manual_guide/products/epson-c823622a-administrators-manual-53386bc/189.png)