Epson C850071 User Guide - Page 18
Modifying the configuration, FieryWebTools, In Network Setup>Protocol Setup>TCP/IP Setup
UPC - 010343818118
View all Epson C850071 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Page 18 Modifying the configuration You should edit the configuration whenever there is any change that would affect your original configuration, such as a change in IP address. First change the specific RIP Station Setup information before configuring the connection. TO MODIFY THE CONFIGURATION: 1. To edit information for a RIP Station in the list of available servers, select the RIP Station by its nickname and click Modify. Edit information in the Modify Server Settings dialog box as necessary, and click OK when finished. 2. To add a new RIP Station to the list of available servers, click Add. Configure the Add New Server dialog box as outlined in step 3 through step 5 above. 3. To remove a RIP Station from the list of available servers, select the RIP Station by its nickname and click Remove. Fiery WebTools In order for network users to access and use Fiery WebTools, you need to set certain RIP Station options in Setup. The names of these options have changed since version 1.1. TO VERIFY THAT FIERY WEBTOOLS ARE SET UP ON THE RIP STATION: 1. Print the Configuration page from the RIP Station Control Panel. For Instructions see the User Guide. 2. On the Configuration page, check the following: • In NetworkSetup>Port Setup>Ethernet Setup, confirm that "Enable Ethernet" is set to Yes. • In Network Setup>Protocol Setup>TCP/IP Setup, confirm that TCP/IP is enabled and that there is a valid, unique IP Address for the RIP Station. • In Network Setup>Service Setup, confirm that Web Services are enabled. 3. If all the conditions listed in step 2 are currently set, the RIP Station is properly set up to use Fiery WebTools. If any of the conditions listed in step 2 are not currently set, you must change them (as described in the Administrator Guide) before you can use Fiery WebTools.