Epson C850071 User Guide - Page 52

Protocol Setup AppleTalk, Protocol Setup IPX Frames

Get Epson C850071 - RIP Station 5000 PDF manuals and user guides
UPC - 010343818118
View all Epson C850071 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Page 52 Gateway-If your TCP/IP network has a gateway, and users outside the gateway print to the RIP Station using TCP/IP, enter the gateway address here. Obtain the correct gateway address from your network administrator. Protocol Setup (AppleTalk) Enable AppleTalk-Select to enable Apple Talk if you have an AppleTalk network connected to the RIP Station. This setting enables the RIP Station to communicate over AppleTalk networks. Select Zone-The RIP Station searches the network for AppleTalk zones in your network segment. Scroll through the list to select the AppleTalk zone in which you want the RIP Station to appear. If your segment has only one zone, the RIP Station is assigned to that zone automatically. If no AppleTalk zone can be found, your network may have no defined zones, or else the network cable has not been connected (see Chapter 4 in the Administrator Guide). Protocol Setup (IPX Frames) Select Frames-Click the Select Frames button to specify IPX frames used with NetWare. See your network administrator to verify which frame type to choose. In the IPX Frames dialog box, select frames and use the Add and Remove buttons to specify the selected frames, then click OK.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Page 52
Gateway
—If your TCP/IP network has a gateway, and users outside the gateway print to
the RIP Station using TCP/IP, enter the gateway address here. Obtain the correct gateway
address from your network administrator.
Protocol Setup (AppleTalk)
Enable AppleTalk
—Select to enable Apple Talk if you have an AppleTalk network con-
nected to the RIP Station. This setting enables the RIP Station to communicate over
AppleTalk networks.
Select Zone
—The RIP Station searches the network for AppleTalk zones in your network
segment. Scroll through the list to select the AppleTalk zone in which you want the
RIP Station to appear. If your segment has only one zone, the RIP Station is assigned to
that zone automatically.
If no AppleTalk zone can be found, your network may have no defined zones, or else the
network cable has not been connected (see Chapter 4 in the
Administrator Guide
).
Protocol Setup (IPX Frames)
Select Frames
—Click the Select Frames button to specify IPX frames used with NetWare.
See your network administrator to verify which frame type to choose.
In the IPX Frames dialog box, select frames and use the Add and Remove buttons to specify
the selected frames, then click OK.