Epson ES-600C User Manual - Page 68
Resolution, Size or scale
View all Epson ES-600C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Resolution The output resolution determines how many pixels, or dots, are used for scanning and reproducing an image. Resolution is measured in units of dpi (dots per inch). Some software uses the term pixels per inch (ppi). As the resolution value increases, the image is read and reproduced in finer detail. At 300 dpi, for example, an image of one square inch is represented by up to 90,000 dots. The 23 resolution settings allow you to choose the best resolution for most types of printers. The settings available are 50, 60, 72, 75, 80, 90, 100, 120, 133, 144, 150, 160, 175, 180, 200, 216, 240, 300, 320, 360, 400, 480, and 600 dpi. To find a matching resolution for your particular output device, follow the guidelines in Chapter 3. The default value of the output resolution is 100 dpi. Size or scale The size or scale function allows you to reduce or enlarge the size of the output image. The value can be set in the range of 50% to 200% in increments of 1%. When the size is set to 100%, the image is scanned at the actual size for the current resolution. The size values determine the vertical and horizontal lengths of the image. When the size is set to 200% the image is enlarged four times the original size. When the size is set to 50%, the image size is reduced to one fourth of the original size. The size function affects the number of dots scanned. An image scanned at 180 dpi and 200% has the same number of dots as an image scanned at 360 dpi and 100%. A-4 Appendix