Epson ET-2750 Users Guide - Page 150
Caution, Print Nozzle, Check Pattern, Print, Print head is clean, Finish, Clean, Parent topic
View all Epson ET-2750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Caution: Never turn off the product or open the printer cover during a cleaning cycle or you may not be able to print. 6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check Pattern and click Print. 7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait at least 12 hours. Then try cleaning the print head again. If quality still does not improve, run a Power Cleaning. If there is still no improvement, contact Epson support. Parent topic: Print Head Cleaning Related concepts Power Cleaning 150