Epson MX-85 User Manual - Page 7
INSTALLATION, Unpacking & Set-up of MX-85, Unpacking
View all Epson MX-85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION 1. Unpacking & Set-up of MX-85 Before removing the MX-85 from the carton, check the box for evidence of shipping damage. If such evidence is present, notify the carrier immediately. 1.1. Unpacking (1) Open carton. (2) Remove accessories; ribbon, manual, etc. (3) Grasp the MX-85 by, its underside and lift straight out with 'packing material attached. (4) Place the printer on a flat surface. (5) Carefully remove packing material. (6) Remove the vinyl cover. 1.2. Repacking Perform in reverse order of above. NOTE: Be sure shipping screws and protective sheet for paper sensor are reinstalled. It is highly recommended that all original material be retained for use in reshipment of the MX-85. -2-
INSTALLATION
1. Unpacking & Set-up of MX-85
Before removing the MX-85 from the carton, check the box for evidence of shipping
damage. If such evidence is present, notify the carrier immediately.
1.1. Unpacking
(1) Open carton.
(2) Remove accessories; ribbon, manual, etc.
(3) Grasp the MX-85 by, its underside and lift straight out with ‘packing material
attached.
(4) Place the printer on a flat surface.
(5) Carefully remove packing material.
(6) Remove the vinyl cover.
1.2. Repacking
Perform in reverse order of above.
NOTE:
Be sure shipping screws and protective sheet for paper sensor are reinstalled. It is
highly recommended that all original material be retained for use in reshipment of the
MX-85.
-2-