Epson MegaPlex MG-850HD User Manual - Page 66
Problem Solving, What To Do When the Lights Come On or Flash, or Flash - lamp life
View all Epson MegaPlex MG-850HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Problem Solving This section explains how to interpret the projector's lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector's status and let you know when a problem occurs. Status lights If the projector isn't working correctly, first press the P power button, let the projector cool down, and unplug the power cord. Then plug the power cord back in and turn on the projector. If this doesn't solve the problem, check the status lights on top of the projector. Light status during normal operation Status lights Light status All lights are off. Power button is on. Cause and solution The projector is turned off. If necessary, connect the power cord. Also check to see if the Illumination setting is to Off. See page 50. The projector is in standby mode. Unplug the projector to turn it off, or press the P power button to turn it on. Power button is on and power light flashes. The projector is warming up. Wait for the picture to appear. or the projector is cooling down. Wait until the light stops flashing and turns off. The projector is now in standby mode. Do not unplug the power cable while the projector is cooling down. This may reduce the life span of the lamp. 66 Problem Solving