Epson PowerLite Home Cinema 3010e User's Guide - Page 44
button on the remote control. See for more information.
View all Epson PowerLite Home Cinema 3010e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
■ RGB Image > Advanced > RGB Note: This setting cannot be used when the Color Mode is set to Auto (see page 32). Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades and Gain for the lightest shades. ■ RGBCMY Image > Advanced > RGBCMY Note: This setting cannot be used when the Color Mode is set to Auto (see page 32). Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press Esc to move to another menu option. You can also access this setting by pressing the RGBCMY button on the remote control. See page 35 for more information. ■ Gamma Image > Advanced > Gamma Note: This setting cannot be used when the Color Mode is set to Auto (see page 32). You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. See page 33 for more information. 44 Making Detailed Adjustments