Epson PowerLite Home Cinema 720 User's Guide - PowerLite Home Cinema 720 - Page 52

Resetting the Lamp Usage Timer, When you see a confirmation prompt, highlight

Get Epson PowerLite Home Cinema 720 PDF manuals and user guides View all Epson PowerLite Home Cinema 720 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

8. Gently insert the new lamp and tighten its screws. Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won't work if the lamp cover is open or loose.) 10. Reset the lamp usage timer, as described below. Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the P Power button. Then follow these steps to reset the lamp usage timer: 1. Press the Menu button on the projector or remote control. 2. Use the menu navigation buttons to open the Reset menu, then select Reset Lamp Hours. 3. When you see a confirmation prompt, highlight Yes and press the Select button. 4. When you're finished, press the Menu button to exit. The lamp usage timer doesn't register until you've used the lamp for at least 10 hours. 52 Maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
52
Maintenance
8.
Gently insert the new lamp and tighten its screws.
Caution:
Don’t touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.
9.
Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)
10.
Reset the lamp usage timer, as described below.
Resetting the Lamp Usage Timer
After replacing the lamp, plug the projector back in, turn on the power switch on the back,
and press the
P
Power
button. Then follow these steps to reset the lamp usage timer:
1.
Press the
Menu
button on the projector or remote control.
2.
Use the menu navigation buttons to open the
Reset
menu, then select
Reset Lamp
Hours
.
3.
When you see a confirmation prompt, highlight
Yes
and press the
Select
button.
4.
When you’re finished, press the
Menu
button to exit.
The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.