Epson Stylus COLOR 850Ne User Setup Information - Page 13

Setup Guide: Install the Network Software 2 Install the Network Software To configure the Ethernet card, you only need to install the network software (EPSON Net!2) on one workstation or on the server, depending on your network. If you have a TCP/IP network, you need to install EPSON Status Monitor 2 on all your Windows 98 and Windows 95 workstations to use the EPSON TCP/IP Printing protocol. Log in as an Administrator (NT) or Supervisor (NetWare). Before you start, turn off all other active applications, including virus protection. Installing EPSON Net!2 Note: If you need to create diskettes If you have the following network configurations and operating to install the software, see Appendix A in your systems, you should install EPSON Net!2 to configure the card: Administrator's Guide, then use this Setup Guide for configuration instructions.  Windows 98, Windows 95, or Windows NT 4.0 with Novell NetWare or TCP/IP  Macintosh with AppleTalk For TCP/IP networks, if you want to use the arp command to set the card's IP address instead of installing EPSON Installing EPSON Net!2 in Windows Net!2, see page 28. 1. Insert the EPSON Stylus COLOR 850Ne CD-ROM in your drive. 11