Epson Stylus COLOR 850Ne User Setup Information - Page 9
Setup Guide: Set Up the Printer, Don't pull off the white portion or try
![]() |
View all Epson Stylus COLOR 850Ne manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setup Guide: Set Up the Printer Caution: To ensure the print heads charge correctly, install the ink cartridges that came with your printer. You must remove the yellow tape from the top of the cartridge or you will permanently damage it. It's okay if a small corner of the yellow tape stays on the cartridge. 2. Remove the ink cartridges from their foil packages. Then remove only the yellow part of the tape seal on the top of each one. Don't pull off the white portion or try to remove the clear seal underneath the cartridge. Remove the yellow tape seal Don't remove the white portion 3. Press the P power button to turn on the printer. The P power light flashes and the B and I ink out lights come on. The black ink cartridge holder moves into loading position. 4. Open the printer cover and lift up the black ink cartridge clamp. 5. Place the black ink cartridge in the holder as shown. Then close the clamp, making sure it clicks into place. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. black ink cartridge holder 7
![](/manual_guide/products/epson-stylus-color-850ne-user-setup-information-70b9067/9.png)