Epson Stylus COLOR 850Ne User Setup Information - Page 17
From the EPSON Installation Program screen, highlight, User's Guide, Administrator's Guide
View all Epson Stylus COLOR 850Ne manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setup Guide: Install the Network Software 6. Select the type of printer(s) you want to monitor and click Next. Caution: If you have dial-up routers in a NetWare environment, 7. they may automatically dial up the next hop and you may be charged for the line connection depending on the number of hops you set. To prevent this and to keep 8. network traffic to a minimum, set hops carefully. Monitor: EPSON TCP/IP printers______ Windows shared printers _____ NetWare printers______ local printers_______ Select Monitor to monitor EPSON network printers that do not have drivers on your computer. Select Do not monitor if network traffic is a problem. Then click Next. Printers: Monitor_______ Do not monitor_______ If you're using NetWare, set the number of hops (0 to 15) and click Next. Number of hops:_______ 9. Check the current settings and click Next. Select No and click Finish. Now you install the second part of Status Monitor 2: 10. From the EPSON Installation Program screen, highlight Install Status Monitor 2 for EPSON Stylus COLOR 850Ne and click the right arrow button . 11. Click Next, then follow steps 5 through 8, using the same settings you used in those steps. 12. Check the current settings and click Next. Select Yes and click Finish to restart your computer. Note: If you are not using EPSON Net!2 on your computer, you do not have to turn off background monitoring. (You should limit the number of systems that monitor the printer, however, to prevent network traffic problems.) 13. After you restart your computer, right-click the green background monitoring icon in your Startup group on the taskbar. Click stop monitoring now. This step turns off background monitoring, which may interfere with EPSON Net!2 when you configure the card. (See page 4-7 in your User's Guide or page 3-8 in your Administrator's Guide to turn on background monitoring later.) After you install the network software, configure the printer's Ethernet card for TCP/IP (page 28), or use EPSON Net!2 to configure your printer for NetWare (page 16). 15