Epson Stylus COLOR 850Ne User Setup Information - Page 36

Setup Guide: Configure the Printer Network Number for Manual Mode The default number is 65535. If you have selected Auto for the Network Number Set, you can't type the network number manually. 4. Click the Send button to save the new settings to the Ethernet card. If the message "Configuration is successfully done" appears, the update is complete. Configuring for NetBEUI You can use NetBEUI in Windows 98, Windows 95, and Windows NT 4.0 networks to print to your EPSON Stylus COLOR 850Ne. You configure the card for NetBEUI using the card's internal home page. Before you can configure the card for NetBEUI, you must:  Set up TCP/IP on all the workstations that will use the printer.  Set the IP address for your Ethernet card. (See page 28.)  Make sure you have either Microsoft Internet Explorer 4.0 or later, or Netscape Navigator 3.0 or later. Note: EPSON Net!2 for Windows and the Ethernet card home page can't be open at the same time. Then, follow these steps to access the Ethernet card home page and configure the card: 1. Run EPSON Net!2. Click the printer you want to configure from the list, and click the Launch Browser button. EPSON Net!2 closes automatically. If you have not assigned an IP address to the Ethernet card, or if you use the default setting (including when you select DHCP to acquire an IP address), you can't configure the Ethernet card for NetBEUI using the Ethernet card home page. Or, run the browser and type the IP address for the Ethernet card. Do not run EPSON Net!2 while the browser is running. Type the following URL: http:// (IP address of the Ethernet card) / The home page appears. 34