Epson Stylus COLOR 850Ne User Setup Information - Page 8

Setup Guide: Set Up the Printer Attach the Paper Support Insert the paper support in the top slot on the back of the printer. Note: Follow all the safety instructions in the Introduction of your User's Guide. Do not put the printer:  In an area with high temperature or humidity  In direct sunlight or dusty conditions  Near sources of heat or electromagnetic interference, such as loudspeakers or cordless telephone base units Caution: Always use the P power button to turn the printer on or off. Never use the external switch on a power strip. Don't use an outlet controlled by a wall switch or timer, or one that uses the same circuit as a large appliance. This may disrupt the power, which can erase memory or even damage the power supply. Install the Ink Cartridges 1. Make sure the printer is turned off (the P power button should be up). Then plug the printer's power cord into a grounded outlet. power button 6