Epson Stylus COLOR 900N User Manual - Page 28
Install the Network Software, Installing EPSON Net! 2
View all Epson Stylus COLOR 900N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Install the Network Software To configure the Ethernet card, you need to install the network software (EPSON Net!2) on only one workstation or on the server, depending on your network. If you have a TCP/IP network, you need to install EPSON Status Monitor 2 on all your Windows 98 and Windows 95 workstations to use the EPSON TCP/IP printing protocol. Log in as an Administrator (NT) or Supervisor (NetWare). Before you start, turn off all other active applications, including virus protection programs. If you need to create diskettes to install the software, see page 103. Then follow the configuration instructions, starting on page 26. For TCP/IP networks, if you want to use the arp command to set the card's IP address instead of installing EPSON Net!2, see page 42. Installing EPSON Net!2 If you have the following network configurations and operating systems, you should install EPSON Net!2 to configure the card: s Windows 98, Windows 95, or Windows NT 4.0 with Novell NetWare or TCP/IP s Macintosh with AppleTalk 21