Epson Stylus COLOR 900N User Manual - Page 51
Configuring for AppleTalk
View all Epson Stylus COLOR 900N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Before you can print using TCP/IP, you still need to do the following on each computer that will use the printer: s Install the printer driver (see page 49) s Add a printer port (see page 51) See page 46 if you need to enable NetBEUI on the Ethernet card. Configuring for AppleTalk To use your printer on an AppleTalk network, you need to configure the Ethernet card for AppleTalk. Follow these steps to configure your card using EPSON Net!2: 1. Open the EPSON Net!2 utility. You see a window like the following: 44
44
Before you can print using TCP/IP, you still need to do the following on each
computer that will use the printer:
■
Install the printer driver (see page 49)
■
Add a printer port (see page 51)
See page 46 if you need to enable NetBEUI on the Ethernet card.
Configuring for AppleTalk
To use your printer on an AppleTalk network, you need to configure the Ethernet
card for AppleTalk.
Follow these steps to configure your card using EPSON Net!2:
1.
Open the EPSON Net!2 utility.
You see a window like the following: