Epson Stylus Pro 3880 Designer Edition Network Guide - Page 19

Printing a Network Status Sheet - test

Get Epson Stylus Pro 3880 Designer Edition PDF manuals and user guides View all Epson Stylus Pro 3880 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

13. Press u or d to change each octet value, then press r to select the next octet. When you have changed the value of the last octet, press and then press the + Cancel/Reset button to exit the printer menu. 14. Turn the printer off then back on again. c Caution: After turning off the printer, wait until the status lights go off before turning it back on; otherwise the network interface may not work correctly. 15. See "Printing a Network Status Sheet" below to print a network status sheet and confirm the new IP address. For Windows, you'll need the IP address during setup. You can also use the EpsonNet Config software to obtain the IP address. Now you can install the printer software (see "Installing the Printer Software" on page 20). Printing a Network Status Sheet 1. Make sure that the printer is not printing and the LCD displays READY. 2. Load three sheets of Letter-size paper. 3. Press the Menu r button on the printer's control panel to enter the printer's menu system. 4. Press d to highlight TEST PRINT, then press r. 5. Press d to highlight NETWORK STATUS SHEET, then press r. 6. Press to print the network status sheet. Setting Up Your System for Network Printing 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Setting Up Your System for Network Printing
19
13.Press
u
or
d
to change each octet value, then press
r
to select the next
octet. When you have changed the value of the last octet, press
and
then press the
+
Cancel/Reset button to exit the printer menu.
14.Turn the printer off then back on again.
c
Caution:
After turning off the printer, wait until the status lights go off before turning it
back on; otherwise the network interface may not work correctly.
15.See “Printing a Network Status Sheet”
below to print a network status
sheet and confirm the new IP address. For Windows, you’ll need the IP
address during setup. You can also use the EpsonNet Config software to
obtain the IP address.
Now you can install the printer software (see “Installing the Printer Software”
on page 20).
Printing a Network Status Sheet
1.
Make sure that the printer is not printing and the LCD displays
READY
.
2.
Load three sheets of Letter-size paper.
3.
Press the
Menu
r
button on the printer’s control panel to enter the printer’s
menu system.
4. Press
d
to highlight
TEST PRINT
, then press
r
.
5. Press
d
to highlight
NETWORK STATUS SHEET
, then press
r
.
6. Press
to print the network status sheet.