Epson Stylus Pro 3880 Designer Edition Network Guide - Page 9
Network Interface Operation, Status lights, Network connector
View all Epson Stylus Pro 3880 Designer Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Network Interface Operation Status lights The status lights provide you with important information on the operation of the network interface. IndicateInsdcicoantnees cctoionnnetcytpioen type RJR-4J-545ccoonnnneecctotorr Flashes when data is Fitsrlaraesnhcseemsivweithdteedn odratraeceived The light on the left indicates whether the network interface is connected to a 10Base-T (green) or 100Base-TX (orange) network. The light on the right flashes when data is being transmitted or received. If the light on the left is solid green and the light on the right is off, the printer is not connected to the network. Network connector The RJ-45 connector is used to connect an Ethernet cable to a network. You can use an Ethernet cable for both 10Base-T and 100Base-TX. c Caution: You must use a Category-5 or higher shielded twisted-pair cable to connect the network interface to a network. Introduction 9