Epson Stylus Pro User Setup Information - Mac - Page 16

Setting Up the Printer, Select the Printer and Selecting the Network Type

Get Epson Stylus Pro - Stylus Color Pro Ink Jet Printer PDF manuals and user guides View all Epson Stylus Pro manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

If you are connecting the printer to an AppleTalk or EtherTalk network, you need to do the following: 1. Install the optional LocalTalk or Ethernet interface card and connect it to the network. See Appendix A of the Reference Guide. 2. Set up the printer as described in "Setting Up the Printer," below. 3. Install the printer driver as described in Chapter 2. 4. Assign a name to the printer using the EPSON Namer. See "Assigning a Name to the Printer" in Chapter 2. 5. Use the Chooser to select the printer and select the network type in the Control Panels. See "Using the Chooser to Select the Printer" and "Selecting the Network Type" in Chapter 2 for instructions. 6. Calibrate the printer to ensure that vertical lines are aligned, as described in Chapter 3. Setting Up the Printer This section explains how to set up your printer before you connect it to your computer. If you need to install an optional interface, see Appendix A of the Reference Guide first. Installing the Printer 1-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
If you are connecting the printer to an AppleTalk or EtherTalk
network, you need to do the following:
1.
Install the optional LocalTalk or Ethernet interface card
and connect it to the network. See Appendix A of the
Reference Guide.
2.
Set up the printer as described in “Setting Up the Printer,”
below.
3.
Install the printer driver as described in Chapter 2.
4.
Assign a name to the printer using the EPSON Namer. See
“Assigning a Name to the Printer” in Chapter 2.
5.
Use the Chooser to select the printer and select the network
type in the Control Panels. See “Using the Chooser to
Select the Printer” and “Selecting the Network Type” in
Chapter 2 for instructions.
6.
Calibrate the printer to ensure that vertical lines are aligned,
as described in Chapter 3.
Setting Up the Printer
This section explains how to set up your printer before you
connect it to your computer. If you need to install an optional
interface, see Appendix A of the
Reference Guide
first.
Installing the Printer
1-3