Epson SureColor P600 Basics and Warranty - Page 48
Notices, Important Safety Instructions
View all Epson SureColor P600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Notices Important Safety Instructions Before using your P600 Series, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the P600 Series. ■ Use only the type of power source indicated on the P600 Series label. ■ Place the P600 Series near a wall outlet where the plug can be easily unplugged. ■ If you won't be using the P600 Series for a long period, unplug the power cord from the electrical outlet. ■ Always turn off the P600 Series using the P power button, and wait until the P power light stops flashing before unplugging the printer or cutting off power to the electrical outlet. ■ Avoid plugging the P600 Series into an outlet on the same circuit as a photocopier or air control system that regularly switches on and off, or on an outlet controlled by a wall switch or timer. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the P600 Series, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the P600 Series for sufficient ventilation. Do not block or cover openings in the P600 Series case or insert objects through the slots. ■ Do not place the P600 Series near a radiator or heating vent or in direct sunlight. ■ Do not use aerosol products that contain flammable gases inside or around the P600 Series. Doing so may cause fire. ■ Place the P600 Series on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. ■ Make sure the P600 Series is at least 4 inches (10 cm) away from the wall. ■ Be careful not to spill liquid on the P600 Series. ■ Except as specifically explained in your documentation, do not attempt to service the P600 Series yourself. 48 Notices