Epson TM H6000 Technical Reference - Page 33
Printable Area, 5.4.5, Printing and Cutting Positions - 07 manual
View all Epson TM H6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
TM-H6000II Technical Reference Guide 1.5.4.4 Printable Area The printable area of a paper roll with a width of 79.5 ± 0.5 mm (3.13" ± 0.02") is 72.2 ± 0.2 mm (2.84" ± 0.008") (512 dots), and the space on the right and left sides are approximately 3.7 ± 2 mm (0.15" ± 0.079"). 72.2 3.7±2 79.5 ± 0.5 Printable area for paper roll NOTE:The print position in the printable area of thermal elements for dots 257 to 512 is shifted approximately 0.07 mm (.003") in the paper feed direction from the position for dots 1 to 256. Be sure not to print a ladder bar code across both printable areas, as this can cause variations in printing that are difficult to read. 1 256 257 512 Approximately 0.07mm (0.0028") Shifting of the print position 1.5.4.5 Printing and Cutting Positions Manual cutter position Autocutter head position Approx. 27 Approx.13 Center of the print dotline Paper feed direction [Units: mm (All the numerical values are typical.)] Printing and cutting positions NOTE:Numeric values used here are typical values; the values may vary slightly as a result of paper slack or variations in the paper. Take this into account when setting the cutting position of the autocutter. Rev. A General Information 1-19