Epson TM H6000 Technical Reference - Page 53
Parallel Connection - windows driver
View all Epson TM H6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
TM-H6000II Technical Reference Guide 2.3.3 Pass-through connections The TM printer is connected to the customer display (DM-D) via a serial port, and the DM-D is connected to the host PC via a serial port. Note: On the DM-D (DM-D500 etc...) which has DIP switch to select Y-type connection, confirm that the DIP switch has been set "Y-type connection: Disable." Application XON/XOFF TM side control (except OPOS) control setting XON/XOFF Not available DTR/DSR 1 - 2 - DTR/DSR (DOS, OPOS, Visual C) - Type A or B Type A or B RTS/CTS (DOS, Windows driver, Visual C, Visual Basic, MSComm) - Type B Type A or B 2.4 Parallel Connection The TM printer is connected to the host PC via a parallel interface board (UB-P02II). The customer display (DM-D) is connected to the host PC via a serial port. Rev. A System Planning 2-9