Epson TM H6000 Technical Reference - Page 90
Autocutter Jam, LED Blinking Pattern
View all Epson TM H6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4.2.2 Autocutter Jam If a foreign object such as a push pin or paper clip drops in the autocutter and causes the auto cutter to lock up, the printer enters an error state and begins the recovery operation automatically. If the problem is not serious, the autocutter returns to its normal position without any intervention by the user. If the autocutter does not return to its normal position by itself, follow the steps below to correct the problem: 1. If the paper roll cover cannot be opened because paper is caught in the autocutter in the receipt section, open the unit cover. Move the tabs on the sides of the cover forward and then lift the cover, as shown on the previous page. 2. Following the instructions on the label inside the printer, turn the knob until you see a pin in the opening, as shown in the illustration below. This returns the cutter blade to the normal position. Pin Knob 3. Close the unit cover. 4.2.3 LED Blinking Pattern 4.2.3.1 Error Types The printer stops all printer operations for the selected paper section, goes offline, and blinks the ERROR LED when detecting an error. ❏ Errors that automatically recover ERROR Print head temperature error Description The temperature of the print head is extremely high ERROR LED Blinking Pattern 320 ms Recovery Recovers automatically when the print head cools Note: Print head temperature error is not abnormal. 4-4 Maintenance & Troubleshooting Rev. A