Epson V11H179020 User Manual - Page 29
Hold down the [Freeze] button for approximately 5, seconds., Turn Power ON Protect on.
UPC - 010343853997
View all Epson V11H179020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Security functions 29 When "Password Timer" is set to "ON" and "Timer" is used The password entry screen will not be displayed at all when the power is turned on until the length of time that has been set has elapsed. When the set length of time has elapsed, the password entry screen will be displayed each time the power is turned on. The length of time referred to here is the total illumination time for the projector's lamp from the point when the projector's menu is closed. If "Password Timer" is set to "OFF," the password entry screen will be displayed each time the power plug is disconnected and reinserted from the electrical outlet. If the projector power is on when it is in standby mode, the password entry screen will not be displayed. When "User's Logo Protect" is enabled (ON) If an attempt is made to carry out any of the following user logo operations, a message is displayed and the setting cannot be changed. To change the setting, set "User's Logo Protect" to "OFF" first. sp.30 • Capturing a user's logo • When the "Extended" - "Display" - "Background Color" menu is changed from "Logo" to "Black" or "Blue," or changed from "Black" or "Blue" to "Logo." • When the "Extended" - "Display" - "Startup Screen" menu ("ON" or "OFF") is changed. Setting Password Protect Use the following procedure to set Password Protect. PROCEDURE A Hold down the [Freeze] button for approximately 5 seconds. The "Password Protect" menu will be displayed. Remote control • If Password Protect has already been enabled, the "Password" screen will be displayed. If the password has been entered correctly, the "Password Protect" menu will be displayed. "When Password Protect is enabled" sp.28 • If Password Protect is set to "ON," attach the accessory Password Protect sticker to your preferred position on the projector as a theft-prevention measure. B Turn "Power ON Protect" on. (1) Select "Power ON Protect," and then press the [Enter] button. (2) Select "ON," and then press the [Enter] button. (3) Press the [Esc] button.