Epson V11H179020 User Manual - Page 30
Turn Password Timer on., Turn User's Logo Protect on., Enter the password.
![]() |
UPC - 010343853997
View all Epson V11H179020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Security functions C Turn "Password Timer" on. If you don't use this setting, proceed to step 4. (1) Select "Password Timer," and then press the [Enter] button. (2) Select "ON," and then press the [Enter] button. (3) Press the [Esc] button. (4) Select "Timer" and then press the [Enter] button. (5) While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the range of 1 to 9999 hours and then press the [Enter] button. If you make a mistake entering the time, press the [Esc] button and re-enter the time. When you have finished using the "Password Protect" menu, the countdown for the elapsed time will start. D Turn "User's Logo Protect" on. (1) Select "User's Logo Protect," and then press the [Enter] button. (2) Select "ON," and then press the [Enter] button. (3) Press the [Esc] button. 30 E Enter the password. (1) To set a password, select "Password" and then press the [Enter] button. (2) The message "Change the password?" will be displayed, so select "Yes" and then press the [Enter] button. The default setting for the password is "0000," but you should change this to your own desired password. If you select "No," the screen shown at step 1 will be displayed again. (3) While holding down the [Num] button, use the numeric keypad buttons to enter a 4-digit number. The number entered will be displayed as "* * * *." Once four digits have been entered, the confirmation screen will be displayed. (4) Re-enter the password. The message "The new password is stored." will be displayed. If you enter the password incorrectly, a message will be displayed prompting you to re-enter the password.
![](/manual_guide/products/epson-v11h179020-user-manual-7f48b1d/30.png)