Epson V11H179020 User Manual - Page 50
Is the power for the computer or video, Are the image signal format settings
UPC - 010343853997
View all Epson V11H179020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Problem Solving 50 The message "Not Supported." is displayed Check Remedy Are the image signal format settings correct? If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu command to select the signal format. "Signal" - "Video Signal" sp.36 Only when projecting images from a video source Does the mode match the frequency and Refer to the documentation provided with your computer for details on changing the resolution and resolution of the image signals? frequency of the image signals being output from the computer. "List of Supported Monitor Displays" sp.73 Only when projecting computer images The message "No Signal." is displayed Check Remedy Are the cables connected correctly? Check that all of the cables required for projection are securely connected. (See the Quick Setup sheet) Has the correct video input port been selected? Press the [Computer], [S-Video], or [Video] button on the remote control or the [Source Search] button on the remote control or the projector's control panel to change the image. sp.20 Is the power for the computer or video source turned on? Turn the power on for the devices. Are the image signals being output to the projector? Only when projecting images from a laptop computer or computer with a built-in LCD screen If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to change the output to an external destination as well as the computer's own monitor. For some computer models, when the image signals are output externally, they no longer appear on the LCD monitor or accessory monitor. (See your computer documentation, under a title such as "External output" or "Connecting an external monitor") If the connection is made while the power is already turned on, the function [Fn] key that switches the computer's video signal to external output may not work. Turn the power for the projector and the computer off and then back on again. (See the Quick Setup sheet)