Epson V11H179020 User Manual - Page 64
Resetting the Lamp Operating Time, When Execute? appears, select Yes.
UPC - 010343853997
View all Epson V11H179020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Maintenance Resetting the Lamp Operating Time The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one. You can do this using the configuration menu. Do not reset the lamp operating time except after the lamp has been replaced, otherwise the lamp replacement period will not be indicated correctly. 64 B Select "Reset" from the configuration menu, and then select "Lamp-Hours reset." For details on this operation, refer to "Using the Configuration Menu." sp.34 Check the buttons you can use, and the operations they perform, in the guide at the bottom of the screen. Remote control Control panel PROCEDURE A Connect the power cable and turn on the projector. C When "Execute?" appears, select "Yes." The lamp operating time will then be reset.