Fujitsu MAB3091SC Product Manual - Page 30

Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.

Get Fujitsu MAB3091SC - Enterprise 9.1 GB Hard Drive PDF manuals and user guides View all Fujitsu MAB3091SC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

(*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information. (*2) The number of user cylinders indicates the max., and includes the alternate cylinder. The number of user cylinders and alternate cylinders can be specified at format of the IDD. (*3) The positioning time is as follows: 2000 4000 6000 86000 10000 2000 4000 6000 8000 10000 MAA31xxxx MAB30xxxx/MAC30xxxx (*4) The start time is the time from power on or start command to when the IDD is ready, and stop time is the time for disks to completely stop from power off or stop command. (*5) This value indicates at ready mode. (*6) Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m. (*7) 5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m. (*8) The maximum data transfer rate may be restricted to the response speed of initiator and by transmission characteristics. (*9) The terminator power pin (SCSI connector) which supplies power to other terminators is not used. C141-E035-03EN 2 - 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
C141-E035-03EN
2 - 3
(*1)
The formatted capacity can be changed by changing the logical block length and using spare
sector space.
See Chapter 3 for the further information.
(*2)
The number of user cylinders indicates the max., and includes the alternate cylinder.
The
number of user cylinders and alternate cylinders can be specified at format of the IDD.
(*3)
The positioning time is as follows:
(*4)
The start time is the time from power on or start command to when the IDD is ready, and stop
time is the time for disks to completely stop from power off or stop command.
(*5)
This value indicates at ready mode.
(*6)
Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.
(*7)
5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.
(*8)
The maximum data transfer rate may be restricted to the response speed of initiator and by
transmission characteristics.
(*9)
The terminator power pin (SCSI connector) which supplies power to other terminators is not
used.
10000
8000
6000
4000
2000
MAA31xxxx
MAB30xxxx/MAC30xxxx
10000
8000
6000
4000
2000