Fujitsu S510 Operator's Guide - Page 240
Troubleshooting Checklist - power adapter
UPC - 097564307218
View all Fujitsu S510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
7.2 Troubleshooting Checklist This section describes common problems that may occur during usage of the ScanSnap and how to solve the problems. Before you call a repair service, perform simple troubleshooting steps in the table below. If performing these troubleshooting steps does not resolve your problem, contact an authorized FUJITSU scanner service provider. Symptom The scanner cannot be turned on. Check This Item Are the AC/USB cable and the AC adapter connected correctly? Is the paper chute closed? (The scanner's power is controlled by closing/ opening the paper chute.) Is Windows normally started up? (This scanner's power is controlled by turning on/off the computer.) Did you press the [POWER] button to turn off the ScanSnap? (The scanner can be turned off by pressing [POWER] button when the paper chute is opened.) Resolution Correctly connect the Power/USB cable. Disconnect and then re-connect the Power cable. (* Wait at least 5 seconds before reconnecting the Power cable) Open the paper chute. Wait until Windows has started up completely. LED will turn off when Windows is starting up or in the sleeping mode. Press the [POWER] button. 220