Fujitsu S510 Operator's Guide - Page 43
Connecting the USB Cable, 2 Connecting the ScanSnap to your PC, ScanSnap, S510 Operator's Guide
UPC - 097564307218
View all Fujitsu S510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
■ Connecting the USB Cable Connect the USB cable as shown below. 2.2 Connecting the ScanSnap to your PC ATTENTION • Use only the USB cable supplied with the Scanner. • When connecting to a USB hub, be sure to connect the ScanSnap to the hub nearest your personal computer (first stage). If you connect it to a USB hub from the second stage onwards, the ScanSnap may not function correctly. • If you connect the ScanSnap with USB 2.0, it is required that the USB port and the Hub be compliant with USB 2.0. The scanning speed may slow down when you connect the ScanSnap with USB 1.1. If your computer has the USB 2 2.0 compatible port, use it. Operation 1. Remove the seal on the back side of the ScanSnap. Connecting the ScanSnap DC 16V USB cable Seal 2. Connect the USB cable to the USB connector on the ScanSnap, and the other end of the USB cable into the USB port on your personal computer. Insert the USB cable into the connector all the way to the end. USB cable ScanSnap S510 Operator's Guide 23