Fujitsu S510 Operator's Guide - Page 254

Turn on the scanner before cleaning the following locations, and clean the following rollers while rotating them. • Feed rollers (2 pieces) Clean lightly taking care not to roughen the surface of the rollers. Take particular care in cleaning the feed rollers since black debris on the rollers adversely affect the pickup performance. • Eject rollers (2 pieces) Clean lightly taking care not to roughen the surface of the rollers. Take particular care in cleaning the eject rollers since black debris on the rollers adversely affect the pickup performance. To rotate the feed rollers and the eject rollers, press the [POWER] button while holding down the [SCAN] button. As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn. 1. Hold down the [SCAN] button. 2. Press the [POWER] button while holding down the [SCAN] button. ⇒ The rollers rotate. ATTENTION Connect the AC adapter and AC cable only when cleaning the feed rollers and eject rollers. 3. Close the ADF. ADF Paper chute ATTENTION After closing the ADF, make sure that it is completely closed. Otherwise, paper jams or other feeding errors may occur. 234